28 September 2013

How To Straighten Bowed/Bent Big Shot Cutting Plates - by Jamie Albanese



Sunday, September 15, 2013 (date posted by Jamie)


How to Prevent Damage and Repair Big Shot Cutting Plates
 
Much like when my hubby takes my car in for an oil change and tire rotation, he's looking out for our safety and the car's performance.  Prevent issues with these simple tips for your Die-Cutting Machine!   See this Video Tutorial on how to Flatten/Straighten Bowed/Bent Big Shot Die-Cutting Plates with a quick trip to your kitchen!!
Check out this video below to see the Do's and Do NOT's of this quick and easy process!
I've been asked more than once (too many times to count, really) how to deal with bowed or bent cutting boards for the Big Shot. 

Preventative:

1. The Big Shot machine comes with 2 clear plates.
Right off the bat mark one for cutting. Use only the cutting mat on top of your sandwich stacks. Be sure to rotate the cutting plate back to front and side to side.

It is normal for your cutting plate to get "cut up" with marks from your dies.

BUT if your cutting plate starts to curl do not attempt to flatten it with your heat tool or by running it through your machine "bump" side up in a tight stack. It may crack and break!

It is still useable with a curl but you are now committed to running it through your machine with the ends curled up. You may also have to push the curled up end down to start your stack when running it through your machine.
Ideally it would best to have 3 plates on the go - 1 for cutting, 1 for the bottom of the stack and another 1 to use for embossing only as a top plate.  I’ve JUST Stickered my plates as I think it will help us all in keeping them straight – literally and figuratively ha, ha, ha.

2. Each machine is slightly different. Each user should play with their machine to "get to know it". Don't be alarmed if the recommended sandwich stack does not work in your machine. Simply experiment and make adjustments.

3. Once you get to know your machine you may want to run some samples through and record on them your unique recipes if different. You may also want to make your own laminated "recipe" shims and keep them with your machine.


See the middle of the video, lol, as I have a cautionary Tale to Tell!!
My Tail of Woe - lol.
Play this video and leave me a comment on what you think.  Share, Pin, Email, Facebook, Tweet, Google+... and Follow me on YouTube, Pinterest, LinkedIn, Instagram and more!

I love that I was able to experience what TO DO and What NOT TO DO - lol... I hope that this inspired YOU to make your platform cutting boards/plates last longer!
20 Minutes to awesome results!!
Flat, again, Clean and more Clear.... the Big Shot Die-Cutting Tool is a FAVORITE tool of mine!!  I love that it's a simple tool yet creates amazing WOW Projects, Texture, and more!


Take a peek at Jamie's Blog

Frame Card With Flower - by Dawn


Frame Card Video:

Frame cards for Advisory Board  2013
Hi Stampers :
 Here are the items we will be using today :
 Modern Medley Designer paper #126926
  • cut at 4" x 6"
Black card stock # 121045
  • cut at  7" x 10 1/4"
  • cut at  4" x 6"
Finished frame  I used the following items :
Apothecarty Accents framelits # 127003
Oval Framelits # 129381
Feel Goods stamp set
  • (w)# 131916
  • (c)# 129684
Hot Glue ( Local store)
Basic Rhinestones # 119246

Making the Card:





Making the Flowers:
 Paper Flowers

Hi Stampers :
Here are the supplies we will be using today :
Big Shot #113439
Fun Flowers Bigz L die #121812
Cherry Cobbler card stock #119685
  • cut 4 pieces at 5 1/2" X 8 1/2"
Early Espresso classic ink #126974
Stamping Sponges #101610
Spray bottle  filled with rubbing alcohol & Shimmer Paint
Candy Dots Brad bases #132293
Paper-Piercing Tool #126189
Paper -Piercing Mat #126199
Large Basic Rhinestone #129324

Paper Flowers Video:



A HUGE thanks, as always, to Dawn Griffith. Her amazing videos can be found HERE